Flexographic Printing Machines
(Centra impression drum type)
-
Materials application: opp pp pe pvc aluminum papaer etc.
-
Cyclinder printing size: (40" 50" 60" 70" 80") x (320mm~1000mm)
-
Printing speed: 20~300 M/min Max. material DIA. 600mm
-
No. of color: 2,3,4,5,6,7,8,10
DESCRIPTION:
1. Transmission: central drum type, the material printed always contact with the press roller for accurate color registration.
2. Structure: designed for lubrication free with less wearing down, better device availability.
3. Color register: vertical and horizontal with fully automatic operation for labor saving.
4. Doctor: ink injection type for high speed printing.
5. Heat: blowing the warm wind from the separated .
6. Heater box makes the printing products more safe.
7. Start: when start, just push the switch, alarm sounds a few seconds the motor begin to run slowly, preset the r.p.m. then it becomes automatic. Equipped with automatic and manual changing speed device for easy operation.
8. Stop: stop & brake time can be adjusted easily.
9. Rubber-adhesive plate: the slight-balance adjustable device can find tune the rubber-adhesive plate position.
10. Specification of cylinder: helical gear for smooth running, specification 7.26mm.
11. Dry: separated heater box equipped with the blower and inverter heating area can be set to be same size with printing material for power saving.
12. Drum: with water cooling circulation.
(Stack type)
-
Materials application: pp pp pe pvc aluminum papaer etc.
-
Cyclinder printing size: (20" 30" 40" 50" 60" 70" 80") x (320mm~1000mm)
-
Printing speed: 20~200 M/min
-
Max. material DIA.: 600mm
-
No. of color : 2,3,4,5,6,7,8,10
-
DESCRIPTION:
1. Tension control: unwind tension control.
2. Motor: main motor with ac inverter can be easily increase speed.
3. Transmission: stack type, timing belt with synchronized and reduce noisy.
4. Structure: designed for lubrication free with less wearing down, better device availability.
5. Heat: blowing the warm wind from the separated heater box makes the printing products more safe.
6. Start: when start, just push the switch, alarm sounds a few seconds the motor begin to run slowly, preset the r.p.m then it becomes automatic.
7. Stop: stop & brake time can be adjusted easily.
8. Rubber-adhesive plate: the slight-balance adjustable device can find tune the rubber-adhesive plate position.
9. Specification of cylinder: helical gear for smooth running, specification 7.26mm.
10. Dry: blowing the warm wind from separated heating box.
11. Color register: micro manual adjustment for vertical & horizontal.
12. Counter: count length by electrical.